Toll Free: 1-800-894-6776

    Silt & Sand

    Liquid Silt & Sand Line Cleaner
    • Client Name: Silt & Sand Line Cleaner
    • Category:Industrial

    Silt & Sand Remover is effective and safe on all types of pipes including: ABS, PVC, Copper and Cast Iron.

    Silt & Sand Remover is recommended for use in 1” to 4” drain lines.



    Grease, Soap scum, Hair, Food buildup, Paper, Rags, Mud


    For opening drains, pour directly into drain. Allow working time of 15 – 20 Minutes.

    For opening lines, turn off all water to lines to be cleaned. Apply directly to line. Amount of product used will vary on diameter and length of line to be leaned, and the amount of buildup in the line. Allow to stand for approximately 15 – 20 minutes. Flush thoroughly with potable water.

    Caution: Extremely corrosive. Wear gloves and eye production as well as protective clothing and boots.

    First Aid Treatment: If swallowed, give 1 glass milk. Do NOT induce vomiting. If splashed in eyes or on skin, flush thoroughly with plenty of water for at least 20 minutes. Call physician or poison control center immediately. See MSDS sheet

    Type: Liquid

    Color: Clear

    Odor: Pungent

    Flammability: Non-Flammable

    Ph: <1

    Preparation Date: April 11, 2017

    Hazard Statements

    H290 – May be corrosive to Metals
    H314 – Causes severe skin burns and eye damage
    H335 – May cause respiratory irritation


    Skin Corrosion/Irritation – Category 1B
    Serious Eye Damage/Irritation – Category 1
    STOT-Single Exposure – Category 3

    Related Project

    Back to Top